Product Description
tape on paper faced metal (platinum paper-faced metal drywall beads and trims)
It is made with a unique,high quality paper laminated to various metal forms. The metal provides maximum strength and protection for the corner, while the paper provides reinforcement to prevent cracking caused by the movement or shrinkage of framing members. The result is a clean, precise corner that is long lasting, provides superior resistance to edge cracking,rust resistance and is not subject to fastener popping.
It creates a smooth rounded corner giving a sense of openness and contemporary style to any room.It is suitable for both 1/2 & 5/8 inch wallboard and are quickly and easily installed using joint compound, leaving a crack resistant corner that is not subject to fastener popping. Available in outside/inside 90 and outside corners,L Trim and J Trim, 90°and 135°round outside corner.
Standard lengths:2.44m,2.74m,3.05m
Paper faced metal-81012A(90° outside corner)
90° and offset outside corner ,tape-on bead, A=12mm, B=28mm, C=28mm, D=12mm
Used for 90°outside corner. Suitable for use on any thickness of wallboard.
Designed with a wider 1"by 1" profile that's easier to install on all cut edges. Reduced bead height results in less use of joint compound. In most cases,reduces the amount of compound needed by one coat.
Paper faced metal-81012L(L Trims)
L Trims paper faced metal "L"shaped,tape-on trim(B4 series) -use where wallboard abuts with suspended ceilings, beams, plaster, masonry and concrete walls, as well as untrimmed door and window jambs. A=14mm,B=24mm,C=42mm,
Paper faced metal-81012J(J Trims)
J Trims paper faced metal "J"shaped,tape-on trim(B9),tape on "J"trim completely surrounds the rough edge of the wallboard, providing a strong and clean corner.tape-on application eliminates frustration with nailing and nail shrink back. Can be used for finishing off bifold closet doors, as well as under all door and window encasements, and to finish rough drywall ends. Does not meet ASTMC047
A=13mm,B=15.5mm,C=15.5mm,D=36mm
Paper faced metal-81012N(90°round outside corner) (TXJ-90)
Softline Bullnose and offset outside corner bead,3/4" bullnose outside corner,tape-on bead (SLOC), A=19mm, B=19mm,Radius=3/4"(19mm), steel strip=42mm
Installs easily to form a smooth rounded outside corner. The 3/4"radius can be used for 1/2" or 5/8"drywall. Paper faced metal-81012N2(135° round outside corner) (TXJ-135)
1" bullnose offset outside corner, tape-on-bead(SLOC OS)
Designed for 135° offset angles. Speeds application and eliminates need for fastening corners on framing members. A=19mm, B=19mm,Radius=1"(25.4mm), steel strip=42mm
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}