XIUJUN 502 strong free nail glue(liquid nail) is a kind of hot plastic elastomer as the main material, add a variety of materials to mix and become a new type of structural adhesive, white or light brown gelation, has a strong stick relay - performance far exceeds the nails; Flexibility - not embrittlement; Quick dry solid - save time and cost; Construction - easy to use common glass glue gun, glue construction; Does not contain formaldehyde - environmental health - completely conforms to the national standard of indoor harmful air control - GB18583-2008; Excellent weatherability; The applicable scope is extremely broad - apply the bonding between all kinds of solid materials; Is a new kind of high quality architectural decoration with glue. Is the best choice for replacement screws and nails, it is the first choice for high-grade decoration craft products, lead without nail decoration trend, make low carbon environmental protection a refined, sophisticated life.
Application:
This product is suitable for the same material or different kind of solid material bonding between each other, such as wood, gypsum board, metal, glass, plastic, rubber, skirting, mirror, shutters, threshold, windowsill, boundary markers, pillar, junction box, stone, ceramic tile, etc., especially suitable for furniture and decoration industry, suitable temperature for - 30 ~ 150degrees centigrade, under high temperature environment for a long time (such as metal roofing, boiler room, etc. ) is not appropriate to use.
Specification: 310 ml /360 grams/PCS. 24PCS/9 kg/box, carton size: 30 X20X24cm
Directions for use
Clean the surface, ensure no oil dirt no water or dust; Cut the pipe mouth and inside the aluminum foil, twist on cut 45 degree Angle of the nozzle, and put a rubber sealant gun on rubber hose extrusion, according to different material consists of the following methods of sealant:
1, light sizing (DOT a thick thin interval) - pressing - fixed objects
2, the weight (dry) interval sizing pressing - - - open volatile 30 to 60 seconds (increase the solvent evaporation rate, strengthen the viscous force) in the early compaction 10-30 seconds - a fixed object
3, the weight (wet) interval sizing (3-5 mm thick) - put 2-3 minutes (surface crust) - pressing the up and down or so slight grinding - - fixed objects
4, overweight and fragile goods with a "well" "" "ten "shaped playing strip rubber surface (increase the force area) and place it 1-2 minutes - pressing (sometimes need to cooperate to clamp or screw clamp etc. ) - fixed objects (about 24 hours, the glue solidified before removing the clamp or screw).
Cleanup methods: This product has not been solidified, available water to remove, scraping, or abrasive removal after dry solid available.
LY/T1206-1997 physical properties testing standards
Chemical formaldehyde detection standards: GB18583-2008
The metal detection standards: EN71-3: 94 + A1: 2000 / AC: 2002
Note:
This product table dry time 2-5 minutes, 20 minutes after the adhesive still can be do mobile (too little glue not moving) when to adjust the adhesive position, more solid adhesion after 1 ~ 3 days, 7 days to reach the best effect (completely curing 72 ~ 168 hours), the final bond of 3 mpa. Construction temperature is 5 ~ 35degrees centigrade, the product is easy to store in a cool, dry ventilated place. This product is lower than 27 degrees centigrade storage shelf life of 24 months. When used to keep the air circulation, incorrect use or deliberately inhaled volatile gas of this product may do harm to the body. This product is flammable, should be stored in a dry and ventilated place, do not let children contact, such as the skin or eyes contact, Use clean water to rinse and came to the doctor. Www. Xiujun. COM
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}